racing to rescue

Archive for April, 2010

Motorcycling is cool. Motorcycling is fast. Motorcycling gives you a rush. There is no doubt about it. I don’t think anyone can dispute the fact that there is a certain breed of person out there that just loves the feeling of being out in the fresh air, cruising down the highway. I suspect there are a lot more people who would like to ride than we know about. The question is, how do they get going?

It’s like a lot of things; take it one step at a time. Later on, I will give my 5 top ways to get into riding, but first, I am going to tell you about my own experience learning to love motorcycles.

I would say I was about 14 years old when I purchased my friend’s tiny Honda Z50R. It was very small, but very fun. I used to ride it around the block and travel to friend’s houses on it. I grew out of that bike fast, but I did learn a few things; how to balance and corner a motorcycle.

My next few motorcycles were all dirt bikes. They were a Suzuki RM80, Honda CR125 and a Suzuki RM125. These were bigger machines and worthwhile investments. They taught me how to ride taller motorcycles and how to ride on a dirt track.

There were many other smaller learning experiences that went along with owning and riding dirt bikes. Those came with time. Some of them included learning where the best dealerships were located, how to repair and maintain a motorcycle, how to purchase the right parts and where the best places to ride were. It was a lot of fun and I wouldn’t give up those experiences for anything.

When I turned 17 years old, I purchased my first street bike. It was a Suzuki GR 650 Tempter. This was a big change for me, because I had never ridden a street motorcycle before. I have to say, it was a great learning bike. There was enough power, but not too much to do anything stupid or get in any trouble. The bike was smooth and just enough to get my feet wet on the streets.

There were a few years during college where I didn’t own a motorcycle, but knew I would soon. After college, I went ahead and bought the bike I own today, a Suzuki GSXR 1100. This is one serious motorcycle, and yes, one I could easily get in trouble on. Sometimes I get shaken by its unexpected power. I would only recommend this type of motorcycle to the most mature and experienced rider.

I love my current motorcycle, but will admit that it does get on my nerves at times. I sometimes wish I owned a laid back highway cruiser. Now that I am getting older, I don’t enjoy hunching over the gas tank as much as I used to. Style is not as important to me anymore and comfort is becoming more. Also, having a larger seat for a passenger is becoming a necessity. No passenger likes riding so high up and having to hold on for dear life.

With all the experience I have gained on a wide variety of motorcycles through the years, I feel that I am in a position to offer to some great tips on how to get into riding.

1. Visit a dealership. Yes, it seems so simple, but a huge hurdle to get past is deciding if you really can feel it in your blood. If you are like me, you will leave the dealership panting like a fool. If you leave still undecided, motorcycling might not be right for you.

2. Talk to people. If you have ever heard a group of riders talk about a trip they have taken or are about to take, chime in. Ask them questions and notice how easily they will include you in the ride. Some of them might even offer to take you as a passenger. The community is friendly and always welcoming to new riders.

3. Think about costs. Motorcycling can be an expensive hobby if you are just getting by already. You need to be ready for the financial side of things. You can expect the cost of the motorcycle, insurance, registration, maintenance, apparel and the cost of fuel. It’s easy to get sucked in to buying every after market part available for your motorcycle, so be sure you can afford the hobby first.

4. Go for a ride. Try to find someone who owns a motorcycle and ask them if you can hop on the back during their next ride. Try to find someone with a larger motorcycle for this, especially if you are larger yourself. You’ll know if motorcycling is the right thing to do once the wind hits your face.

5. Take a training course. I am one of those types of people who just want to get a bike and hop on, but friends of mine have told me how important a training course really is. They thought they knew all there was to know about motorcycling, but each day they came away with new knowledge. It’s important to learn how to ride properly.

After considering and completing the tips above, you should be in a position to purchase your first motorcycle. Look through the motorcycle classifieds or visit your local dealer. Find the right motorcycle for you and make the purchase. Since you made some riding contacts and are somewhat familiar with motorcycling in general, you should be in good shape. Just remember, safety comes first and when it comes to riding, patience is a virtue.

In an era of new technology, ATVs are gaining popularity tremendously. Now-a-days, they are a part of many activities like racing, hunting, etc. Because of the involvement of ATVs in different types of activities, they possess many personalize features which can make your ATVs perfect for various activities.

Types of ATV Accessories

There is an infinite variety of ATV accessories to make each and every ride more comfortable and convenient. The different types of accessories include clothing, bags, and storage boxes. These storage boxes can be adhered to the anterior or posterior end of the ATV. For the longer trips, there are coolers which help in keeping drinks or fruits cool.

There are different types of trunks that are attached at the rear end of the ATV. There is also an availability of fuel storage device in order to store fuel while going for a long trip. There are other accessories also like bottle holders, fender bags, camouflage clothes, helmet, etc. Basically, many of these ATV accessories help in providing safety while riding, such as the helmet, gloves, clothing, etc.

Where To Buy Accessories

There are many local dealers, specialty shops, and online retailers from where you can purchase the accessories of ATVs. It is always recommended to purchase from reputable and trustworthy companies or retailers. You should always go for renowned websites for the online purchasing of accessories.

You should be well versed about the status of the companies in terms of their policies, customer care services, etc. And it is not so that you should always run after the name and brand but the most important thing which should always be considered is the quality of the materials used in manufacturing the accessories so that you should always get a durable or long lasting product.

Types of ATV Tools

There are different types of ATV tools that strengthen your ATVs.

a – Cycra Mechanic Roller Cart: It is one of the ATV tools that will make life easier while performing routine maintenance on ATV. It serves as a tool carrier and a seat to relax when you are working on an ATV.

b – iShock F-18 Rhino Shocks: It is the tool that will be really helpful while riding Yamaha Rhino. They are ample in size and are strong possessing an external reservoir with an option of speed adjustability. One can easily collect unlimited information of this tool over their at website.

c – Camo-up your ATV tires in order to enjoy the fun of hunting as they are very much useful for hunting because of their camouflage feature and also they don’t get punctured easily. They approximately cost around $100. The other related information can be collected by going through their site.

d – High Tech ATV box is a powder-coated diamond-plate aluminum that costs around $180. It helps in reducing the noise while riding the ATV and possesses a convenient drain and ventilation holes at the bottom. All the things kept in it are completely safe due to the facility of locking ATV box.

Hence, you can easily choose the accessories to meet your requirements in order to enjoy the ride of your ATV.

Automotive air bag permeation testing is very important for automotive air bag filling and release performances.

The material of automotive air bag is a laminated film of rubber and nylon. Air bag is filled with helium when working.

The rapid filling of air bag is of great importance. It is a must for the passenger to be stopped by the fast filled bag which can also exhaust promptly. Therefore, excellent and proper permeation performance of air bag is very important.

Labthink DM 2/330 Differential and Equal Pressure Method Gas Permeability Tester can test film and laminated materials including air bag laminated material. This tester can execute differential pressure and equal pressure in the same chamber. Three specimens can be tested simultaneously in 3 chambers. Poisonous, explosive and other gases can be tested as well. The temperature control range is 5C-95C, which is very convenient to test the permeability performance of airbag during storage and when triggered by heat.

Labthink, the excellent provider of testing instruments and testing services, is devoted to provide most excellent and complete quality control solutions for pharmaceutical, foodstuff, cosmetics, packaging, printing, adhesive, automotive, petrochemistry, environment, biology, new energy, construction, aviation and electronic industries worldwide.

Labthink is devoted to share excellent quality testing and control techniques with global clients and is known for wide coverage of international testing standards. Labthink participates in the drafting of several important standards of food, pharmaceutical and packaging industries, and is the excellent partner of national certification institutes.

Labthink has also established cooperation with IGT, Rycobel, Metrotec, Chilton, Moroka and other renowned distributors to provide attentive and prompt technical services for her customers in more than 40 countries and regions.

Labthink aims at creating satisfactory value and professional services for her customers.

Labthink, think for you only!

Labthink Instruments Co., Ltd.

No. 144 Wuyingshan Road, Jinan 250031, China

Tracy Bao  info@labthink.cn

Tel: 0086 531 85061153  fax:0086 531 85812140

Motorcycles are very popular, with thousands of them on the road. You will find them in a variety of makes and models for your enjoyment. Finding exactly the style you want that fits your body can prove to be difficult, especially if you are extremely short or very tall. Having a customized motorcycle made to your specifications is a great alternative, but it is also more expensive.

One of the most well known custom motorcycle makers is Jesse James, owner of West Coast Choppers. Jesse James has been passionate about motorcycles since he was seven years old. He has customized motorcycles for many celebrities including Shaquille O’Neal, Kid Rock, and Kyle Petty. The bikes range in price from $50,000 to $150,000.

While this is going to be much too expensive for the average individual, you can still get a great customized motorcycle from some other sources. There are many things you need to consider to get started. First, what is it that you need from a motorcycle that you can’t get from a standard one at any retailer? If it is simply the colour, you will save a great deal of money by purchasing it from the retailer and having it repainted. In some cases, you may be able to contact the manufacturer and have the bike painted your ideal colour at the factory.

Most of the time, individuals need to have a motorcycle customized to fit them properly. Take Shaquille O’Neal for example. He is such a large person, that the average motorcycle just doesn’t work well for him. Jesse James was able to use O’Neal’s measurements to create a motorcycle that was comfortable for him to ride. Customized motorcycles are a great choice for those with a disability that prevents them from being able to operate a standard motorcycle.

If you are determined to have a customized motorcycle, take the time to research the various manufacturers you have to choose from. Keep in mind that you may have to wait several months or even years to get the motorcycle you want if the manufacturer is very busy. Always discuss the options you want in great detail as well as the price. If the manufacturer won’t agree to your specifications then look for someone who will.

It is a good idea to conduct research about the manufacturer. Find out how long they have been customizing motorcycles. Ask for references and to see samples of their work. You will also want to inquire about warranty information and a guarantee if you aren’t pleased with the work. In most cases, you will have to pay a deposit before work begins on your customized motorcycle. Make sure they are familiar with working with the model of motorcycle you want to have customized.

Having your very own motorcycle is a great recreational item to spend your time with. However, investing in a customized motorcycle will allow you to have the very best motorcycle that fits your style as well as your body. Being comfortable on your motorcycle will give you more enjoyment and you can also use it for long road trips. You are less likely to be involved in a motorcycle accident if the motorcycle is a proper fit. While a customized motorcycle is more expensive than a traditional model, it is an investment that is well worth it.

A tutorial shows you how to convert YouTube to mp3, M4A, WMA, WMV, MPG for your mp3 players or mobile phones such as iPod, iPhone and Blackberry etc. Do you want to get this method of convert Youtube to mp3, mp4, mpg, wmv? You only need to download and install a YouTube Video Converter named Wondershare YouTube Downloader.
Step1: Download and install Wondershare Youtube Downloader,it’s a professioanl YouTube video converter,it can download YouTube video,and convert Youtube to MP3 and many other video formats like mp4,mpg,wmv etc.
Step2: Run the YouTube Video Converter, load YouTube files and set output in mp3.So you’ll get the mp3 files from YouTube video in minutes. Vice versa, you’ll get the video files as mp4, wmv, mpg, etc.

Step 3.Click ‘Start’ button to begin to convert YouTube to mp3.

Tips to Youtube video converter:
1.If you hope the MP3 files extracted from YouTube video sounds more clearer, you have to learn the audio/video setting parameter of Wondershare YouTube Downloader:

Sample Rate: In developing an audio sound for computers or telecommunication, the sample rate is the number of samples of a sound that are taken per second to represent the event digitally.

Channel: Set the number of output channels. A value of 1 indicates monophonic sound, 2 stereophonic. Some devices may have more than 2 channels, and some high-end devices may not support mono. Returns the number of channels the device was set to.

Bit rate: Bit rate is generally measured as the number of “bits per second” (bps) at which the data in an audio is being delivered. A higher bit rate means that the audio has more information.

Sample Rate: In developing an audio sound for computers or telecommunication, the sample rate is the number of samples of a sound that are taken per second to represent the event digitally.

2. Video Preview. The YouTube video converter provides a great FLV video player, and you can preview the whole YouTube videos before converting.

3. Batch download and batch convert. Click “Related”, you can download all relevant video listed on YouTube at a time.

4. FLV converter, it can not only convert YouTube to MP3 and also can convert FLV to AVI, WMV, and MPEG.YouTube downloader is not just a YouTube-to-MP3 Converter, but also can convert YouTube FLV to AVI, WMV, MPEG, MOV, etc, which are compatible with iPod, iPhone, PSP, Apple TV, Zune, and other mobile devices.

5. Automatically detect and download YouTube video, easy to use

YouTube downloader provides a friendly user interface, a sensitive sniffer to detect and download any YouTube videos.

From:convert YouTube to mp3