racing to rescue

Posts Tagged ‘Proper’

Have you ever ridden a motorcycle before? Even the mere idea of riding a motorcycle gives most people a little jolt of excitement. It doesn’t matter if we’re talking about a sportbike, or “crotch rocket,” or a laidback cruiser; there’s an inherent visceral thrill that’s generated by these two-wheeled machines. Ask someone if they’ve ever ridden a motorcycle, whether as a driver or a passenger, and you’ll either get an affirmative answer or a familiar “No, but I’ve always wanted to….”

Most motorcycle riders already cruising the highways or cornering through twisting canyons know all about the irresistible draw of motorcycles. But experienced riders all realize that riding a motorcycle demands a mature mindset, fundamental skills, constant practice, and most importantly, proper gear and training. If you want to learn to ride a motorcycle, learn it the proper way.

First, enroll yourself in a motorcycle rider training program. A fully licensed and certified training program, such as the one offered by the MSF (Motorcycle Safety Foundation), should be your preferred choice. Such a program will teach you the fundamentals of riding, as well as the factual and practical knowledge needed to pass a written and ridden motorcycle license test. Over the past few decades, these programs have taken hundreds of thousands of fledgling riders and put them on the right road to riding success.

Don’t forget to carry along some basic riding equipment such as gloves, long-sleeved jacket, and sturdy boots. A helmet and a motorcycle will be provided. One or more highly experienced instructors will guide you through one or more days of lectures, following by actually riding exercises in an enclosed lot. Don’t be intimidated though, the teachers will start you out at a slow, easy pace and have you controlling and riding a real motorcycle in no time.

After you’ve learned the basics of riding, go get your motorcycle license. Now you’re free to hit the streets and practice on your own, or better yet, with more experienced riders. Make sure you take it very easy at first, and definitely avoid situations you can’t handle, such as slashing canyon runs or rush-hour traffic in the middle of a big city. Your focus should be on staying safe and practicing the fundamental skills that you’ve learned.

Gradually (but much more quickly than you realize), your skills will improve greatly, and you’ll join millions of other riders out there having a blast on the wide open highways today.

In conclusion, after you’ve become an experienced rider yourself, make sure to guide younger riders by pointing them toward the same proper steps to learning to ride a motorcycle. Too many riders start out by ignoring the proper, safe path of learning to ride, and end up in a dangerous situation or lack of training due to impatience or an immature mindset.

The vast majority of riders involved in a motorcycle accident took the easy way out and avoided proper training, or worse, didn’t wear the proper safety equipment. Luckily, you’re a mature, intelligent rider who will learn to ride the right way.

Of all the information out there and of all the products being sold to the public to preserve and protect your vehicle’s finish, little or nothing is said about a simple product used in the Automotive Detailing and Paint Repair industry.

Some detailers don’t really understand the benefits of using this product in the way I am going to talk about, and how it is beneficial to their customers and why it should be done on a somewhat regular basis!

Well what is this product?

It is called a Clay Bar.

This is not a new product or a secret product. However, it is not a well know product. Its use even by manufacturers is not well explained or understood.

We have some insight that is unique and not well understood by detailers or body shops because of the range of automotive appearance restoration we specialize in. Since many of the vehicles we work on have already been detailed we have to leave the vehicles “front line ready” when we are finished.

Unlike a body shop whose job does not include any kind of ‘detailing” we have to leave the vehicles we work on “front line ready”. Also, unlike a detail shop we have paint restoration experience.

Why does this matter to you, and how can our experience and knowledge benefit you?

First of all let me explain a basic rule to paint preparation when preparing for refinishing. The surface being worked on has to be completely “sterile” and properly scuffed in order for new paint to adhere well to the area being refinished.

Let me illustrate it this way. If I paint something that has a decal on it and I paint over that decal what happens if that decal’s glue looses its adhesive quality? That area will certainly peel off sooner or later. You would not paint over a pin stripe or decal but on a larger scale if you have removed all surface contaminates you will have great adhesion and a long lasting paint job!

One of the biggest things that makes a paint job a quality paint job is how well the surface has been “prepped’! I cannot stress this point enough!

Have you ever priced a paint job? Have you wondered why some body shops can do a paint job for $400 and others will tell you $3000?!

Did you know the factory paint job on your vehicle can be valued somewhere between $3000 to $6000 depending of the make and model? Any paint work that is not done to the factory standard can devalue your vehicle the amount of your factory paint job.

The prep work done for a paint job when done properly can be the difference between a factory quality paint job and disaster!

So you have this $3000-$6000 paint job on your car, how do you protect it?

First of all do not neglect it by not removing damaging surface contaminates such as tar, sap, bugs, industrial fallout etc. Sap can actually boil in the sun and burn off the finish under the sap, ruining the panel where the sap is.

Second, make sure your waxes or sealants used to protect your paint job are of good quality and prepare the finish for proper adhesion of your wax or sealant.

Should you “prep” the finish for wax or sealants? Absolutely! However, most people think they are prepping for wax but they are not. So how do you “prep” the finish for wax?

The best way to “prep” your vehicles finish for wax or paint sealants is the use of a clay bar! Before you wax and after you have washed your vehicle use a clay bar at least once a year or every six months for the best protection of that expensive paint job.

A clay bar will remove any surface contaminates that washing did not. It can even remove hard water stains on the paint if they are not too bad. This is also the only way to remove paint over spray. A Clay Bar can also be used on the glass and on the headlights which should be part of your wax or sealer routine espeacially if you have restored your headlight lenses.

How do you use a clay bar?

A clay bar has to be used with a lubricant. It is a simple process really. In fact you can even use water as a lubricant. However, it is better to use a spray way that will both lubricate the panels you are clay barring and can be used to clean up clay residue as you go.

Simply spray the area you are clay barring…a 12″ X 12″ area is best and rub the surface with the clay bar back and forth in a side to side motion. You will hear the clay bar picking up light contaminates and as the surface is cleaned you will stop hearing the movement of the clay bar.

You can also feel the surface. If it feels rough like tiny pieces of sand after you have washed it, it needs to be clay barred. Use the same method above and listen and feel the area you are working on after you dry it off.

So work your small area wipe it dry when you think it is finished and check the surface with the inside of your hand rubbing lightly feeling and listening for rough areas. Once you have completed a section you can move on the next.

A word of caution, it has been said, although I gave never experienced this, that a clay bar can rub the paint off eventually if not kept lubricated while using. Use common sense and you should be fine.

Well there it is, this is the best way to prep for waxing your vehicle and a great way to be sure you are getting the best results from your wax.

Enjoy and I hope this article helps!

www.headlightcare.com

www.headlightcare.com/smf

Time may have caused your car interior to stink like a combination of a thousand stench ranging from tobacco, socks, coffee, or wet dog. It is very difficult to regain the new car scent with the upholstery absorbing years of dust and other pollutants.

Car upholstery is made from different materials like leather, cloth, or vinyl. Cleaning of the interiors and the upholstery may be difficult and expensive since professional cleaners charge very high fees to remove the minutest of stains.

Cleaning the automotive upholstery takes patience and a little help from common household products. One may maintain and clean the upholstery from minor stains but big ones are better done by professionals who employ strong cleaning solutions without damaging the upholstery.

Cleaning Common Car Upholstery Problems

? Dust- Car upholstery can easily be cleaned from surface dust using a vacuum cleaner. Extension tools of the vacuum will help reach gaps and crevices to get rid of dust in between automotive upholstery. Cleaning solutions like leather or vinyl protector will help maintain them in great condition and make them more durable for long.

? Spills – No matter how one avoids spills on the car upholstery, bad things happen when we hit a bump on the road. The key to cleaning it is by soaking as much of the liquid out of the upholstery as soon as possible by using rags or paper towels. Press the towel against the upholstery to get rid of as much liquid as possible. Damp cloth can be used on spills on leather seat covers. Leather upholstery is best treated for misfortunes like this by using protectants on a regular basis to maintain the supple feel of the leather. It is best to avoid build up of dust or dirt on leather seats.

? Heavy Stains – Heavy stains are so unsightly. One quick remedy is to use baby wipes to absorb the fresh stain. If they don’t do the cleaning trick then try to brush a little soda water on the upholstery.

? Bad Odor – Automotive upholstery can easily absorb any odor from the circulating stale air inside or from air coming from the outside. A cup of coffee or a bag of fries can have tremendous effect on the smell of the car’s upholstery. A quick solution to this problem is opening the windows and spraying deodorizer to the interiors. Shampooing the carpet may also get rid of cigarette smell and improve the quality of air inside the car. If the smell stays it is recommended to consult professional upholstery cleaners who have the proper tools and cleaning materials.

? Leather Upholstery – Aside from applying protective liquid to the leather upholstery, regular cleaning and avoiding of extreme heat will lengthen the life span of the leather.

Cleaning automotive upholstery is the best solution to have that new car scent once more but like the cliché goes prevention is still better than an ounce of cure. Cars are considered major investments. Aside from keeping the engine in top mechanical form, taking care of the interiors especially of the upholstery will make our driving experience more pleasurable and more comfortable.